Technical Information- Gen I, II and III

The previous generations of the Haldex LSC, Generation I, II and III, is based on a Swedish patent acquired by the Haldex Group.

The unit can be viewed as a hydraulic pump in which the housing and an annular piston are connected to one shaft and a piston actuator is connected to the other.

The two shafts are connected via the wet multi-plate clutch pack, normally unloaded and thus transferring no torque between the shafts.

When both shafts are rotating at the same speed, there is no pumping action. When a speed difference occurs, the pumping starts immediately to generate oil flow. It is a piston pump, so there is a virtually instant reaction with no low-speed pumping loss.

The oil flows to a clutch piston, compressing the clutch pack and braking the speed difference between the axles. The oil returns to the reservoir via a controllable valve, which adjusts the oil pressure and the force on the clutch package.

 To read more about Gen I, II and III click here

For info about selected dates of introduction click on the link below: