Variants
| Part Number | NLA* | Type | Stroke (mm) |
Thread Torque |
Torque |
Mounting nuts Thread Torque |
After Market comments |
CustomerPort position T° | Customer Part Number | Approval | CAD |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 125 160 001 | 16 | 57 |
0° & Centre M16*1.5 35-40Nm |
45° 27-41Nm |
M16*1.5 180-210Nm |
Standard | - | - | BC 0169.1 |  |
|
| 125 160 002 | NLA |
Centre M16*1.5 35-40Nm |
Rolled** |
M16*1.5 180-210Nm |
- | Samro | 2100257 | ||||
| 125 160 003 | NLA |
90° M16*1.5 35-40Nm |
125 160 008 | Schmitz | 1000830 | |
|||||
| 125 160 004 | NLA |
0° M16*1.5 35-40Nm |
125 160 009 | 1001745 | |||||||
| 125 160 005 |
90° M16*1.5 35-40Nm |
- | Gigant | 00019083 | |
||||||
| 125 160 008 |
90° M16*1.5 35-40Nm |
Schmitz | 1078346 1187322 |
|
|||||||
| 125 160 009 |
0° M16*1.5 35-40Nm |
1078348 1187323 |
|||||||||
| 125 160 010 |
Centre M16*1.5 35-45Nm |
0° | 125 160 001 | MB-TAS | A0084205224 | |
|||||
| 125 160 011 | NLA | Rolled** | 125 160 001 | A0084208524 | |||||||
| 125 200 001 | 20 | 64 |
0° & Centre M16*1.5 35-40Nm |
135° | 
M16*1.5 180-210Nm |
- | - | - | BC 0175.1 | |
|
| 125 200 002 |
Centre M16*1.5 35-40Nm |
Rolled** | 
M16*1.5 180-210Nm |
Samro | 2100218 | ||||||
| 125 200 003 |
0° M16*1.5 35-40Nm |
Schmitz | 1002097 1187748 |
|
|||||||
| 125 200 005 | NLA |
0° & Centre M16*1.5 35-40Nm |
315° | 125 200 001 | Gigant | 00019105 | |
||||
| 125 240 001 | 24 | 64 |
0° & Centre M16*1.5 35-40Nm |
315° |
M16*1.5 180-210Nm |
Standard | - | - | BC 0101.1 | |
|
| 125 240 002 | NLA |
Centre M16*1.5 35-40Nm |
90° |
M16*1.5 180-210Nm |
- | ||||||
* NLA = No Longer Available
** Rolled clamp band variant, port position T can't be changed
Technical data
- Mounting bolts: M16x1.5
- Torque mounting bolts: 180 - 210 Nm
- Torque clamp band (if available): 17 - 19 Nm
- Ports: M16x1.5
- Torque fittings: 35 - 40Nm (depends on used fitting)
- Sealing: internal rubber boot
- Pushrod length: 15 mm
