Use kit 97432 for RIGHT SIDE application

Use kit 97433 for LEFT SIDE application

Including :

• ModulT DBT22LT Air disc brake with carrier/without brake pads.

Find corresponding brake pads kit for this application here.

Service Video library

Initial procedure

1. Remove brake pads GEN1
2. Remove brake pads GEN2
3. Remove actuator
4. Remove disc brake unit
5. Install disc brake unit
6. Install actuator
7. Install brake pads GEN1
8. Install brake pads GEN2

Function test

Final procedure

Tightening torques

• Sliding pins screws: 180 Nm + 70°
• Brake chamber fixation nuts: 180 ±20 Nm
• PWS/PWIS screw: 24 Nm
• Fitting screws on the axle : always follow the vehicle/axle manufacturer's recommendations!