Tool Box
Complete toolbox 95231
Description
| ID | Part Number | Description |
|---|---|---|
| A | 95219 | Mandrel for the removal and assembly of slide function bearings and composite bushing |
| B | 96820 | Nut for the removal and assembly of slide function bearings and composite bushing * |
| C | 95221 | Clamp washer for the assembly of slide function bearings and composite bushing |
| D | 95222 | Cup for the removal of slide function bearings and composite bushing |
| E | 95224 | Mounting tool for adjustment spindle bellows onto the thrust plate |
| F | 95225 | Mounting tool for adjustment spindle bellows into the calliper – left |
| G | 95226 | Mounting tool for adjustment spindle bellows into the calliper – right |
| H | 95233 | 3/4” drive long reach 14 mm hexagon for slide pin bolts |
| I | 97240 | 3/8” drive Torx T55 for the Reset Shaft * |
| J | 95210 | Special tool for removing reset shaft complete * |
| K | 96819 | Threaded spindle used with pull-out/pull-in tool pieces * |
| L | 95423 | Axial bearing used with the threaded bar |
* New tool for GEN II, GEN I toolbox can be upgraded using the corresponding part number
