Variants

The table below summarise all technical specification for all variants of Standard EGP levelling valves.

For more information about installation, maintenance, etc. See Standard EGP levelling valve main page.

Variants

Part No NLA* Type Symbol Port 1, 21, 22 Linkage Remark CAD
612 035 001   1.25 1 M 12 x 1.5 - - downloads-icon-15.png
612 035 011   003 575 709

-
612 035 021   3 -
612 035 031   4 2 -
612 035 041   1.25 1 Push-in 8x1 -
612 035 051   3 -
612 035 061   4 2 -
612 035 071   5 -
612 035 081   4 M 12 x 1.5 - -
612 035 091   1.25 1 003 640 009 -
612 035 511 NLA 1.25 1 M 12 x 1.5 003 575 709 Filter at port 1 downloads-icon-15.png
612 035 521 NLA 3
 
612 036 001   3 1 1/4"-18NPTF - - downloads-icon-15.png
612 036 002 NLA -
612 036 011   1.25 -
612 036 051   0.8 -
   
612 041 021   5 5 Push-in 8x1 - Without check valve at port 1 downloads-icon-15.png
 
612 053 001 NLA 3 1 1/4"-18NPTF - - downloads-icon-15.png
612 053 011   1.25 -
612 053 021   5 -
 
612 054 001 NLA 1.25 1 M 12 x 1.5 - - downloads-icon-15.png
612 054 011 NLA 003 575 709 -
612 054 021 NLA 3 -
 
612 056 001  

4

 

3

Push-in 8x1

No port 21

003 575 709

With T-port 1

Single circuit

downloads-icon-15.png

612 056 011 NLA

4

Push-in 8x1

No port 22

612 056 021   6 Push-in 8x1 With T-port 1
 
612 057 001  

3

 

3

Push-in 8x1

No port 21

003 575 709 Single circuit downloads-icon-15.png
612 057 011 NLA

4

Push-in 8x1

No port 22

*NLA = No Longer Available

Symbol

Symbols are showing the internal function of the levelling valve, with restrictions inside, the reaction will be progressive (increase lateral stability for road vehicle), whereas without restrictions the time to inflate the bellows will be shorter (container trailer, tipper), see also Type charts below.

DIN ISO 1219
 
Symbol 1 Symbol 2 Symbol 3

Symbol 1 (2).JPG

Symbol 2 (2).JPG

Symbol 3.JPG

 

 

 
Symbol 4 Symbol 5 Symbol 6
Symbol 4.JPG Symbol 5.JPG Symbol 6.JPG

 

DIN 74253

DIN74253 Levelling valve.png

Type chart (flow)

The Type chart shows the air flow depending the angle of the lever. The higher the type number is (internal diameter of the valve) the higher air flow rate is reached. The curve profil is also important, as they are more or less progressive in the range 0° to 20° angle.

Levelling valves Type charts.JPG