Lift Axle Valve - ILAS I
ILAS I is a DUAL circuit lift axle valve for suspension systems usually without EB+.
ILAS I - Dimension
ILAS I - Variants
| Hand operated | Load depended | Electric controlled | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Part No. | NLA** | CAD | lifting | lowering | lowering | lifting | lifting / lowering |
Traction support* |
Remark |
| 352 028 001 | NLA |
|
 |
|
|
 |
|
|
|
| 352 028 011 | NLA | |
|
|
|
|
|
||
| 352 028 012 | NLA | |
|
|
|
|
|
||
| 352 028 013 | NLA | |
|
|
|
|
|
||
| 352 028 014 | NLA | |
|
|
|
|
|
||
| 352 028 015 | NLA | |
|
|
|
|
|
||
| 352 032 030 |
|
|
|
|
|
|
|
+ 2x push in (6x1) | |
| 352 032 035 | |
|
|
|
|
|
|||
| 352 032 045 | NLA | |
|
|
|
|
|
||
| 352 035 A35 | NLA |
|
|
|
|
|
|
|
can replace 352 054 xxx |
| 352 035 C42 | NLA | |
|
|
|
|
|
||
| 352 035 H30 | NLA | |
|
|
|
|
|
||
| 352 035 P36 | NLA | |
|
|
|
|
|
||
| 352 037 I32 | NLA |
|
|
|
|
|
|
|
|
| 352 037 V51 | NLA | |
|
|
|
|
|
||
| 352 037 Z51 | |
|
|
|
|
|
|||
| 352 054 E35 | NLA |
|
|
|
|
|
|
|
can replace 352 035 xxx |
| 352 054 I33 | NLA | |
|
|
|
|
|
||
| 352 054 X53 | |
|
|
|
|
|
|||
* = Traction support is not controlled by speed signal or overload prevention as requested by ECE regulations (no connection to EBS systems)
** NLA = Not longer available
Part number systematic
Except of versions 352 028 xxx the last three digits show direct the setting of each valve.
Example: 352 032 030 is set to 3.0 bar for lowering the axle.
On full automatic versions there is a letter in the part number. This letter shows the lifting pressure, e.g. 352 035 A35. The lowering pressure is 3.5 bar and the lifting pressure is 0.7 bar, see table below.
| Letter | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| bar | 0.7 | 0.8 | 0.9 | 1.0 | 1.1 | 1.2 | 1.3 | 1.4 | 1.5 | 1.6 | 1.7 | 1.8 | 1.9 | 2.0 | 2.1 | 2.2 | 2.3 | 2.4 | 2.5 | 2.6 | 2.7 | 2.8 | 2.9 | 3.0 | 3.1 | 3.2 |
ILAS I - Settings
| Set able range | ||||||||
|---|---|---|---|---|---|---|---|---|
| Part No. | Lowering (bar) |
Lifting (bar) |
Lowering (bar) |
Lifting (bar) |
Switching pressure- Difference (bar) |
Ports | Remark | |
| 352 028 001 | 2.5 | - | not set able | - | 1.5 | 6x push in (8x1) | ||
| 352 028 011 | 3.0 | - | 3.0 - 5.0 | - | 1.5 | |||
| 352 028 012 | 3.5 | - | 3.0 - 5.0 | - | 1.5 | |||
| 352 028 013 | 4.0 | - | 3.0 - 5.0 | - | 1.5 | |||
| 352 028 014 | 4.5 | - | 3.0 - 5.0 | - | 1.5 | |||
| 352 028 015 | 5.0 | - | 3.0 - 5.0 | - | 1.5 | |||
| 352 032 030 | 3.0 | - | 3.0 - 5.0 | - | 1.5 | 6x push in (8x1) | + 2x push in (6x1) | |
| 352 032 035 | 3.5 | - | 3.0 - 5.0 | - | 1.5 | |||
| 352 032 045 | 4.5 | - | 3.0 - 5.0 | - | 1.5 | |||
| 352 035 A35 | 3.5 | 0.7 | 3.0 - 5.3 | 0.7 - 3.1 | min 1.4 | 6x push in (8x1) | can replace 352 054 xxx | |
| 352 035 C42 | 4.2 | 0.9 | 2.1 - 2.9 | 0.9 - 1.9 | min 1.4 | |||
| 352 035 H30 | 3.0 | 1.4 | 3.0 - 5.3 | 0.7 - 3.1 | min 1.4 | |||
| 352 035 P36 | 3.6 | 2.2 | 3.6 - 6.0 | 1.5 - 3.2 | min 1.4 | |||
| 352 037 I32 | 3.2 | 1.5 | not set able | 0.7 - 2.2 | min 1.4 | 6x push in (8x1) | ||
| 352 037 V51 | 5.1 | 2.8 | 3.6 - 6.0 | 0.7 - 3.2 | min 1.4 | |||
| 352 037 Z51 | 5.1 | 3.2 | 3.6 - 6.0 | 0.7 - 3.2 | min 1.4 | |||
| 352 054 E35 | 3.5 | 1.1 | 3.0 - 5.3 | 0.7 - 3.1 | min 1.4 | 6x push in (8x1) | can replace 352 035 xxx | |
| 352 054 I33 | 3.3 | 1.5 | 3.0 - 5.3 | 0.7 - 3.1 | min 1.4 | |||
| 352 054 X53 | 5.3 | 3.0 | 3.6 - 6.0 | 0.8 - 3.5 | min 1.4 | |||
