Lift Axle Valve - ILAS III
ILAS I is a SINGLE circuit lift axle valve for suspension systems usually without EB+.
ILAS III - Dimension
ILAS III - Variants
| Hand operated | Load depended | ||||||
|---|---|---|---|---|---|---|---|
| Part No. | NLA | CAD | lifting | lowering | lowering | lifting | Remark |
| 352 047 025 |
|
 |
|
|
 |
||
| 352 047 030 | |
|
|
|
|||
| 352 047 032 | |
|
|
|
|||
| 352 047 035 | |
|
|
|
|||
| 352 047 040 | |
|
|
|
|||
| 352 047 045 | |
|
|
|
|||
| 352 047 048 | |
|
|
|
|||
| 352 047 100 | |
|
|
|
Not adjusted | ||
| 352 047 200 | NLA | |
|
|
|
||
| 352 049 000 | NLA |
|
|
|
|
|
Not adjusted |
| 352 049 100 | |
|
|
|
|||
| 352 049 200 | NLA | |
|
|
|
||
| 352 051 I40 |
|
|
|
|
|
||
| 352 051 000 | NLA | |
|
|
|
Not adjusted | |
| 352 051 100 | |
|
|
|
|||
| 352 051 200 | |
|
|
|
|||
Part number systematic
The last three digits show direct the setting of each valve.
Example: 352 047 025 is set to 2.5 bar for lowering the axle.
On full automatic versions there is a letter in the part number. This letter shows the lifting pressure, e.g. 352 051 I40. The lowering pressure is 4.0 bar and the lifting pressure is 1.5 bar, see table below.
| Letter | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| bar | 0.7 | 0.8 | 0.9 | 1.0 | 1.1 | 1.2 | 1.3 | 1.4 | 1.5 | 1.6 | 1.7 | 1.8 | 1.9 | 2.0 | 2.1 | 2.2 | 2.3 | 2.4 | 2.5 | 2.6 | 2.7 | 2.8 | 2.9 | 3.0 | 3.1 | 3.2 |
Versions which are not set to a specific pressure ex factory (basic versions) can be identified by the last three digits of the part number, e.g. 352 047 000/100/200
ILAS III - Settings
| Set able range | ||||||||
|---|---|---|---|---|---|---|---|---|
| Part No. | Lowering (bar) |
Lifting (bar) |
Lowering (bar) |
Lifting (bar) |
Switching pressure- Difference (bar) |
Ports | Remark | |
| 352 047 025 | 2.5 | - | 1.5 - 2.9 | - | 1.1 | 5x push in (8x1) | ||
| 352 047 030 | 3.0 | - | 3.0 - 5.3 | - | 1.5 | |||
| 352 047 032 | 3.2 | - | 3.0 - 5.3 | - | 1.5 | |||
| 352 047 035 | 3.5 | - | 3.0 - 5.3 | - | 1.5 | |||
| 352 047 040 | 4.0 | - | 3.6 - 6.0 | - | 1.5 | |||
| 352 047 045 | 4.5 | - | 3.6 - 6.0 | - | 1.5 | |||
| 352 047 048 | 4.8 | - | 3.6 - 6.0 | - | 1.5 | |||
| 352 047 100 | - | - | 3.0 - 5.3 | - | 1.5 | Not adjusted | ||
| 352 047 200 | - | - | 1.5 - 2.9 | - | 1.1 | |||
| 352 049 000 | - | - | 3.6 - 6.0 | - | 1.5 | 5x M12x1.5 | Not adjusted | |
| 352 049 100 | - | - | 3.0 - 5.3 | - | 1.5 | |||
| 352 049 200 | - | - | 1.5 - 2.9 | - | 1.1 | |||
| 352 051 I40 | 4.0 | 1.5 | 3.0 - 5.3 | 0.7 - 3.1 | min 1.4 | 5x push in (8x1) | ||
| 352 051 000 | - | - | 3.6 - 6.0 | 1.5 - 3.2 | min 1.4 | Not adjusted | ||
| 352 051 100 | - | - | 3.0 - 5.3 | 0.7 - 3.1 | min 1.4 | |||
| 352 051 200 | - | - | 2.5 - 2.9 | 0.9 - 1.9 | min 1.4 | |||
