| 1 |
95210 |
special tool for removing reset shaft complete |
| 2 |
95219 |
mandrel for the removal and assembly of slide function bearings and composite bushing |
| 3 |
95220 |
nut for the removal and assembly of slide function bearings and composite bushing |
| 4 |
95221 |
clamp washer for the assembly of slide function bearings and composite bushing |
| 5 |
95222 |
cup for the removal of slide function bearings and composite bushing |
| 6 |
95423 |
axial bearing used with the threaded bar |
| 7 |
95224 |
mounting tool for adjustment screw bellows onto the thrust plate |
| 8 |
95225 |
mounting tool for adjustment screw bellows into the calliper - left |
| 9 |
95226 |
mounting tool for adjustment screw bellows into the calliper - right |
| 10 |
95230 |
threaded spindle used with pull-out/pull-in tool pieces |
| 11 |
95232 |
3/8” drive torx T55 for the reset shaft |
| 12 |
95233 |
3/4” drive long reach 14mm insex for slide pin bolts |
