Description | Part No. | Length | NYA/ NLA** |
CAD | Connector 1st EB+ | Connector 2nd |
---|---|---|---|---|---|---|
![]()
|
814026001 | 1.5 m | ![]() |
Power A, blue,
Female plug 7 pole |
DIN similar connector
Male socket 7 pole |
|
814026011 | 4.5 m | |||||
814026021 | 12 m |
**NYA = Not yet available, NLA = Not longer available
General
- Power supply adaptor cable for EB+ with DIN connector
- Used in combination with standard front adapter cable
- 1.5 m and 4.5 m variant in standard cases, interface is here close to EB+ location,
- 12m variant in case where after EOL the supply cable has to be installed e.g. in the bottom of a elsewhere installed fridge box, or in case customer want to be able to replace the front socket easily without pulling the complete main cable out of the chassis.
- Conforms to IP67 (BS EN 60529) when mated with EB+ and ISO Front Adaptor Cable
- Cable material: PVC, ADR approved
- ECU Connector: Blue
- Connector: Black, DIN 72585, 7 pole
- Operating voltage: 24V
- Operating temperature: -40°C to +70°C
Installation Overview

Connector (Top View)

Cable
ISO Pin | DIN Pin | Wire Colour | Function | mm² |
---|---|---|---|---|
1 | 7 | Red | B + | 4.0 |
2 | 6 | Black | B + Ignition | 1.5 |
3 | 4 | Yellow | B - Ignition | 1.5 |
4 | 5 | Brown | B - | 4.0 |
5 | 3 | White | Cab Lamp | 1.5 |
6 | 2 | White/Green | CAN High | 1.5 |
7 | 1 | White/Brown | CAN Low | 1.5 |