Super Aux Cable DIN

Description Part No. Length NYA/
NLA**
CAD Connector 1st EB+ Connector 2nd

 

814004301 1 m   downloads-icon-15.png Power B,

black,

4 pole

DIN 72585 connector

Male

Pin 1 = Stop light
Pin 2 = B- (24N)
Pin 3 = Input A
Pin 4 = Input B

814004311 6 m  

**NYA = Not yet available, NLA = Not longer available

General

  • Backup power and control input cable connecting into lightning system
  • Control inputs (2) can be linked to EB+ AUX functions, refer to DIAG+ AUX Setup!
  • Notice also Super AUX sample installations in the AUX schematic database!
  • Standard cable in case where e.g. a lift axle or a steer axle is installed and traction from cab and locking during reversing is needed, this cable will be used if no trailer switch is required
  • Lightning system must provide corresponding connector.
  • Conforms to IP67 (BS EN 60529) when mated with EB+ ECU Super Aux Port (GEN2 / GEN3 )
  • Cable material: PVC, ADR approved
  • ECU Connector: black
  • Bayonet Connector: DIN 72585, ISO 15170-B1-4.1-Sn/K1
  • Operating voltage: 24V
  • Operating temperature: -40°C to +70°C

Connector (Top View)

Cable

ECU Connector
Socket
DIN Connector
Pin
Function Wire colour mm²
1 -      
2 1 B + / Stop light Input Red 1.5
3 -      
4 -      
5 4 Super AUX B Input Brown 1.5
6 2 B - Input White 1.5
7 3 Super AUX A Input Yellow 1.5