Super Aux Cable Y 2x DIN

Description Part No. Length NYA/
NLA**
CAD Connector 1st EB+ Connector 2nd

 

814029101 A = 6 m

B = 2 m

NYA downloads-icon-15.png Power B,

black,

7 pole

ISO 15170 connector (A) 
Male
Pin 1 = Stop light
Pin 2 = B- (24N)
Pin 3 = Input A
Pin 4 = Input B

ISO 15170 connector (B)
Female
Pin 1 = Input C
Pin 2 = 24V output
Pin 3 = not used
Pin 4 = not used

**NYA = Not yet available, NLA = Not longer available

General

  • Backup power and control input (Super AUX) cable connecting into lighting system
  • Default cable in case where e.g. a lift axle or a steer axle is installed and traction support from cab and/or locking during reversing is needed, cable supports additional connection of a trailer mounted switch by bayonet connector
  • Super AUX control inputs (3) can be linked by software setup to all AUX functions, refer to DIAG+ AUX setup
  • Notice also Super AUX sample installations in the AUX schematic database
  • Lighting system must provide corresponding connector
  • Conforms to IP67 (BS EN 60529) when mated with EB+ ECU Super AUX port (GEN2 / GEN3 )
  • Cable material: PVC, ADR approved
  • ECU connector: black
  • Lighting system bayonet connector: DIN 72585, ISO 15170-B1-4.1-Sn/K1
  • Switch bayonet connector: DIN 72585, ISO 15170-B1-2.1-Sn/K1
  • Operating voltage: 12 - 24V
  • Operating temperature: -40°C to +70°C

Connector (Top View)

Cable

ECU Connector
Socket
DIN Connector
Pin
DIN Connector
Socket
Function mm²
1 - - Not used  
2 1 - B + / stop light input 1.5
3 - 2 24V output, low current 1.0
4 - 1 Super AUX C input 1.0
5 4 - Super AUX B input 1.5
6 2 - B - input 1.5
7 3 - Super AUX A input 1.5