EOLT - End Of Line Test Selection

EOLT - End Of Line Test Selection

  • Operator Name:
    The EOL test is very important and should only be performed by trained people. The operator name will be stored in the EOL report. The default user name can be set in DIAG+ settings to simply handling.
  • Sensor Tests:
    shows wheel speed sensor output, for EB+ by default disabled as part of next test
  • Sensor-Modulator Tests:
    detection of wheel speed leads to brake application on corresponding channel
  • Push Through Tests:
    pneumatic demand pressure must create corresponding delivery pressure
  • EBS Pressure Tests:
    EB+ performs pressure output tests corresponding to load plate settings
  • EB+ Soft Docking:
    US-sensor position, beeper and tail lights test
  • Lamp And Auxiliary Tests:
    also Stability sensor calibration and speed / load / demand value simulation
  • Leak Tests:
    suspension and brake system leakage test, thresholds adjustable in DIAG+ settings
  • Pause Between Tests:
    if enabled user has to confirm next test step

Note: User modification of test preselection can be disabled in DIAG+ settings