Manual Brake Adjuster
Part no. CS44071
item status Active
Product line Haldex
Manual Brake Adjuster - Heavy Duty Straight Arm
- Forged steel
- 30,000 Inch Lbs.
- Bushed arm holes
- Permanently lubricated, yet are equipped with zerk fittings for optional lubrication
- Positive lock mechanism is protected from rust and corrosion by shaft sealing
- Unit is to be mounted with adjusting nut away from push rod only.
- Replacement for KN44071 - 7" heavy duty arm.
|Spline Diameter-Spline Count||1-1/2"-28|
|Arm Length||5.0, 6.0, 7.0|