Manual Brake Adjuster
Part no. KN44061
item status Active
Product line Premium line
Manual Brake Adjuster - Straight Arm
- Forged steel.
- 26,000 Inch Lbs.
- Bi-directional design.
- Press-out arm hole bushings.
- Permanently lubricated, yet are equipped with zerk fittings for optional lubrication.
- Positive lock mechanism is protected from rust and corrosion by plating and shaft sealing.
- Assemblies are plated to provide superior rust protection.
- BUSHING NUMBER - 45210129
|Spline Diameter-Spline Count||1-1/2"-28|
|Arm Length||5.5, 6.5|