Caliper Service Kits

(1) Mandrel, (1) nut, (1) Reinstall Washer, (1) Cup for Slide Function Bearing, (3) Mounting Tools for the Mechanism Bellow, (1) 3/4" Drive, Long Reach, 14mm, (1) 3/8" Drive Torx T55 for the Reset Shaft, (1) Special Tool for removing the Reset Shaft complete, (1) Threaded Spindle for pull in/pull out tools, (1) Axial Bearing for use with the Threaded Bar

(1) Reset Shaft Protection Plug, (1) Mechanism Bellows, (1) Spring Bracket, (1) Grease Tube

(1) Bellows Assembly Tool, (1) Press Tool Radial Seal, (1) Guide Assembly Tool, (1) Circlip Assembly Tool

(1) Carrier, (2) leading slide pin bearings, bearinig spacer, leading slide pin, (2) slide pin screws, leading slide pin protective cap, trailing slide pin bushing, trailing slide pin, training slide pin protective cap, adjustment plug, (2) slide pin bellows, spring bracket.

(1) Gen II DBT22LT Thrust Plate, (1) Mechanism Bellows, (1) Spring Bracket, (1) Reset Shaft Plug, (1) Tube Grease

(1) Radial Seal, (1) Plug, (1) Adjustment Shaft

(2) Pad Springs, (1) Pad Retainer, (1) Retainer Bolt, (1) Locking Tab

(2) Pad Springs, (1) Pad Retainer, (1) Spring Braket, (1) Reset Shaft Protection Plug

(2) Protection Boots, (2) DBM6 Bushings, (2) DBM4 Clips, (2) DBM5 Clips, (1) Plug

(2) Protection Springs, (2) DBM5 Clips, (2) DBM6 Bushings

(2) leading slide pin bearings, bearinig spacer, leading slide pin, (2) slide pin screws, leading slide pin protective cap, trailing slide pin bushing, trailing slide pin, training slide pin protective cap, adjustment plug, (2) slide pin bellows, spring bracket.

(4) Slide Pin Attaching Bolts, (2) Protection Cups, (1) Adjustment Tool Plug, (4) Bellows, (2) Protection Caps, (4) Slide Pins, (4) Teflon Bushings

Investors Relations & Haldex information

Caliper Service Kits

Notes

Investors Relations & Haldex information

North America

Europe

Global

Caliper Service Kits

Login