EL1300 4-Hole Base Mount
EL1300 Compressor
Part no.
EL13022
item status
Active
Product line
Haldex
4-Hole Base Mount
- Belt Drive
- End Cap Oil Feed
- Base Oil Drain
- Special Bottom Plate for Ford
- Water Cooled
- Top/Flange Discharge Type
- Overall Height: 11.42 in.
- Overall Width: 4.79 in.
- Overall Length: 8.93 in.
- External Shaft Length: 2.14 in.
- Approximate Weight: 44 lbs.
- EL13022 Changeover/Installation Instructions: L31024.
- Service Units are furnished without governors and manifolds and may require head rotation and end cap rotation before installation or changeover.
- Thru-drive units must not exceed 65 ft. lbs. of transmitted torque.
- Typical - Torque Nut to 80-100 ft. lbs.
- Include Installation Gaskets.
 |
|
Technical specs
| Head Rotation | Left |
| Notes | Ford, bottom cover with oil drain |
| Overall Height | 11.42 in. |
| Overall Width | 4.79 in. |
| Overall Length | 8.93 in. |
| External Shaft Length | 2.14 in. |
| Bore Diameter | 2.75 in. |
| Stroke | 1.50 in. |
| Turbo-Charge Pressure | 35 Max PSI |
| Rated Displacement | 13.0 CFM @ 1250 RPM |
| Approximate Weight | 44 lbs. |
Related products
Unloader Kit for EL1300/EL1600/EL3200 Compressors
Notes Comes with unloader gasket
Notes Comes with unloader gasket
- Two kits required for EL3200 Compressors.
Part no.
RNT26A
