EL1300 Cummins Compressor
Part no. EL13040X
item status Active
Product line Reman
Remanufactured Cummins In-Line
- Head Rotatable
- Double Flange Mount, Gear Drive
- Flange Oil Feed, Side Option on Service Units
- Top/Flange Discharge Type
- Water Cooled
- Overall Height: 12.38 in.
- Overall Width: 5.68 in.
- Overall Length: 9.09 in.
- External Shaft Length: .54 in.
- Approximate Weight: 50 lbs.
- Orientation viewed from front.
- Changeover/Installation Instructions: Bendix to Midland - L31025, Cummins to Midland - L31026, Cummins Long to Midland - L31027.
- Service units are furnished without governors and manifolds and may require head rotation and end cap rotation before installation or changeover. Service and remanufactured units have a 1 inch oil drain port with no threads.
- When replacing a Cummins-built compressor you must purchase an SN3711AK Intake Manifold Kit and an SN3711K or L (low profile) Discharge Manifold Kit.
- Typical - Torque Nut to 100-135 ft. lbs.
- Include installation gaskets.
|Application||Cummins In-Line Engines|
|Notes||High Capacity Replacement EL16040|
|OEM Part Number||NT7004B Exact Replacement|
|Overall Height||12.38 in (EL1300), 12.57 in. (EL1600)|
|Overall Width||5.68 in.|
|Overall Length||9.09 in.|
|External Shaft Length||.54 in.|
|Bore Diameter||2.75 in.|
|Stroke||1.50 in. (EL1300) and 1.87 in. (EL1600)|
|Rated Displacement||13.0 (EL1300) and 16.1 (EL1600) CFM @ 1250 RPM|
|Approximate Weight||50 lbs.|