Double Diaphragm Spring Brake for drum brake
This table shows Haldex brake chambers for drum brake applications. Both LifeSeal (SOP 2021) and Blue Seal range are listed with Xref (cross-references) for easy comparison. This list applies to both OE and AM applications.
Manufacturers will find drawings (CAD and 3D) as well as Annex 19 Test report for Vehicle Type Approval. Distributors and workshops can compare the variants and find a suitable application, using for example the port orientation information. Some applications have fixed orientation
All actuators in the list are supplied with a yoke and pushrod sealing done with a disc (no boot protection). Therefore, the pushrod lenght is given with yoke included.
| Type | Part number | Stroke | Port / Orientation | Mounting nuts | Pushrod Length | Comment | Xref | TÜV Report | CAD | 3D |
| 16/24 | 346 1624 001 | 75 | M16 / 90° Adj. | Y | 238 | - | - | BC0186.0 |  |
 |
| 20/30 | 346 2030 001 | 75 | M16 / 90° Adj. | Y | 245 | - | - | OPH -T-01530-00.3 | |
|
| 136 2030 001 | 76 | M16 / 90° Adj. | Y | 246 | NLA | 346 2030 001 | - | |
||
| 136 2030 002 | 76 | M16 / 90° Adj. | N | 227 | NLA | - | ||||
| 136 2030 004 | 76 | M16 / 90° Adj. | Y | 227 | NLA | |
||||
| 136 2030 005 | 76 | M16 / 270° Adj. | Y | 226 | NLA | |||||
| 136 2030 006 | 76 | M16 / 270° Adj. | Y | 251 | NLA | |||||
| 24/30 | 173 2430 280 | 76 | M16 / 90° Adj. | Y | 227 | - | - | BC0213.0 | |
|
| 346 2430 002 | 75 | M16 / 90° Adj. | Y | 245 | - | - | OPH-T-01531-00.3 | |
|
|
| 136 2430 001 | 76 | M16 / 90° Adj. | Y | 246 | NLA | 346 2430 002 | - | |
|
|
| 136 2430 002 | 76 | M16 / 90° Adj. | N | 227 | NLA | |
||||
| 136 2430 004 | 76 | M16 / 270° Adj. | Y | 84 | NLA | - | ||||
| 136 2430 005 | 76 | M16 / 270° Adj. | Y | 227 | NLA | |
||||
| 136 2430 006 | 76 | M16 / 90° Adj. | N | 236 | NLA / Oblong hole yoke |
|
||||
| 136 2430 007 | 76 | M16 / 270° Adj. | N | 236 | NLA | |
||||
| 136 2430 008 | 76 | M16 / 270° Adj. | Y | 251 | NLA | |||||
| 136 2430 009 | 76 | M16 / 270° Adj. | Y | 194 | NLA | |||||
| 136 2430 010 | 76 | M16 / 270° Adj. | Y | 226 | NLA | |||||
| 30/30 | 346 3030 001 | 75 | M16 / 90° Adj. | Y | 245 | - | - | 0PH-T-01532-00.3 | |
|
| 136 3030 001 | 76 | M16 / 90° Adj. | Y | 246 | NLA | 346 3030 001 | |
|
||
| 136 3030 002 | 76 | M16 / 90° Adj. | N | 227 | NLA | |||||
| 36/30 | 225 3630 001 | 75 | M?? / 37,5° Adj. | Y | 233 | - | - | OPH-T-02276-00.05 | |
|