Backup power and control input cable connecting into the lightning system
Control inputs (2) can be linked to EB+ AUX functions, refer to DIAG+ AUX Setup!
Notice also Super AUX sample installations in the AUX schematic database!
Standard cable in case where e.g. a lift axle or a steer axle is installed and traction from cab and locking during reversing is needed, this cable will be used if no trailer switch is required
Lightning system must provide a corresponding connector.
Conforms to IP67 (BS EN 60529) when mated with EB+ ECU Super Aux Port (GEN2 / GEN3 )
Cable material: PVC, ADR approved
ECU Connector: black
Bayonet Connector: DIN 72585, ISO 15170-B1-4.1-Sn/K1
Operating voltage: 24V
Operating temperature: -40°C to +70°C

Connector (Top View)

Cable