DIAG+ offset setting for green <> yellow
because of the mounting position the lower sensors share the same offset, the top level sensors offset is different
therefore the sensors per level must be linked to the same channel
if you choose green or yellow makes no difference, it's only important that the channel offset matches the mounting position
1x extension cable required to reach top level
2x extension cables required to connect level sensors

Item	Qty.	Description	Part No.	Notes
1	1	EB+ Soft Docking ECU	364 608 001
2	1	Outline marker lamp and brake cable	364 606 001	green connector on ECU
3	1	LED outline marker lamp (left)	364 617 001
4	1	LED outline marker lamp (right)	364 617 011
5	1	Sensor and audio beeper cable	364 605 001	brown connector on ECU
6	1	Audio beeper	364 616 001
7	4	Ultrasonic sensor	364 614 001
8-3	1	Sensor splitter cable	364 607 001	0.5m/0.5m/0.5m
8-3	1	Sensor extension cable 1m	364 622 001
8-4	1	Sensor splitter cable	364 607 001	0.5m/0.5m/0.5m
8-4	2	Sensor extension cable 3m	364 622 011