Haldex

Variantes

 

Accionamiento manual

Depende de la carga

Control eléctrico

 
Referencia NLA** CAD elevación bajando bajando elevación elevación /
bajada
Tracción
apoyo*
Observación
352 028 001 NLA

downloads-icon-15.png

 
352 028 011 NLA
352 028 012 NLA
352 028 013 NLA
352 028 014 NLA
352 028 015 NLA
 
352 032 030 NLA

downloads-icon-15.png

Electric controllable

with ports 41 & 42

= 2x push in (6x1)

352 032 035 NLA
352 032 045 NLA

 

352 035 A35 NLA

downloads-icon-15.png

can replace 352 054 xxx
352 035 C42 NLA
352 035 H30 NLA
352 035 P36 NLA
 
352 037 I32 NLA

downloads-icon-15.png

Directly electric controlled
352 037 V51 NLA
352 037 Z51 NLA
 
352 054 E35 NLA

downloads-icon-15.png

can replace 352 035 xxx
352 054 I33 NLA
352 054 X53 NLA
  • = Traction support is not controlled by speed signal or overload prevention as requested by ECE regulations (no connection to EBS systems)
    ** NLA = No longer available

 

Part number systematic

Except of versions 352 028 xxx the last three digits show the direct setting of each valve. Example: 352 032 030 is set to 3.0 bar for lowering the axle. On full automatic versions, there is a letter in the part number. This letter shows the lifting pressure, e.g. 352 035 A35. The lowering pressure is 3.5 bar and the lifting pressure is 0.7 bar, see table below.

 

Letter A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Bar 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2