Super Aux Cable Y 2x DIN
- Backup power and control input (Super AUX) cable connecting into the lighting system
- Default cable in the case where e.g. a lift axle or a steer axle is installed and traction support from cab and/or locking during reversing is needed, cable supports additional connection of a trailer mounted switch by bayonet connector
- Super AUX control inputs (3) can be linked by software setup to all AUX functions, refer to DIAG+ AUX setup
- Notice also Super AUX sample installations in the AUX schematic database
- Lighting system must provide a corresponding connector
- Conforms to IP67 (BS EN 60529) when mated with EB+ ECU Super AUX port (GEN2 / GEN3 )
- Cable material: PVC, ADR approved
- ECU connector: black
- Lighting system bayonet connector: DIN 72585, ISO 15170-B1-4.1-Sn/K1
- Switch bayonet connector: DIN 72585, ISO 15170-B1-2.1-Sn/K1
- Operating voltage: 12 - 24V
- Operating temperature: -40°C to +70°C
Connector (Top View)
Cable
| ECU Connector Socket |
DIN Connector Pin |
DIN Connector Socket |
Function | mm² |
| 1 | - | - | Not used | |
| 2 | 1 | - | B + / stop light input | 1.5 |
| 3 | - | 2 | 24V output, low current | 1.0 |
| 4 | - | 1 | Super AUX C input | 1.0 |
| 5 | 4 | - | Super AUX B input | 1.5 |
| 6 | 2 | - | B - input | 1.5 |
| 7 | 3 | - | Super AUX A input | 1.5 |