Semi-trailer - 2M
The kit, cable and accessories in this page are needed for your application.
Installation Guide and Equivalence report are available in the Documentation.
36 U-ABS braking system schematics are available here.
U-ABS kit(s) for your application
950 364 828 U-ABS 2S/2M kit
This kit includes the following parts :
- 1x 364 564 001 U-ABS 2S/2M Premium assembly
- 2x 950 364 503 Sensor, angled
- 2x 814 004 471 Cable for sensor, 4m
- 1x 814 030 001 Cable DIAGN/CAN to SOV, 6,5m
- 1x 028 539 109 Warning label
- 1x 028 525 709_M Instruction label for U-ABS
Power cable for your application
- ISO 7638 socket for semi trailer
- U-ABS Power-A plug
- 5 pins
- All variants fullfil ADR specifications
- More information and diagnostic
|
Part number |
Length (m) |
Technical drawing |
|---|---|---|
| 364 510 001 |
12 |
|
| 364 510 021 |
15 |
Additional parts for MGX retrofit
The MGX MCER valve originally included the automatic emergency braking function. When installing a new ABS system, you must install a Relay emergency valve to realise this function.
Relay Emergency Valve 351 008 122
MGX-2E (Grey) and MGX-2 (Black) were equipped with 45 or 60 teeth exciters:
- U-ABS / ABS 4.0 system is compatible with 60 teeth exciters up to 420mm tyre dynamic radius.
- If 45 teeth exciter or 60 teeth with dynamic radius over 420mm, exciters need to be replaced with 80/100 teeth!
- The sensors provided in the kits could require a new sensor bracket on the axle!